Posted in For motorcycles
-
-
The ready-to-use tribotechnical composition is intended for processing the fuel system of internal combustion engines (gasoline, diesel) cars, four-stroke engines of motorcycles, jet skis, ATVs, snowmobiles, boats, motor boats and other equipment.
Designed for 2000-2500km
Recommended price: 1290 rub.
Article: 7ND1718
Volume: 25 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
Properties:
• The tribotechnical composition of NEODRIVE is not a fuel additive, compatible with all types of fuel used in the car.
• The tribotechnical composition forms a servo layer on the details of the fuel supply system (including the system for injecting nozzles, especially piezoelectric nozzles), thereby protecting it from premature wear and, in some cases, restores worn areas of rubbing parts.
• The composition changes the molecular structure of the fuel so that the combustion process proceeds more fully, with an increase in heat transfer. Covers the surface of the combustion chamber with a layer of molecules that create the effect of repulsion of particles of burning fuel having the same charge. As a result, there is no soot on candles, nozzles, in the combustion chamber, rings, lower specific fuel consumption, lower coolant temperature, lack of self-ignition, reduction of detonation in gasoline engines, and mild operation of diesel engines.
Efficiency:
• reduces fuel consumption;
• reduces harmful exhaust emissions;
• restores and keeps clean injectors;
• improves engine performance;
• increases engine life;
• removes deposits on valves and in the combustion chamber;
• cleans the fuel system (jets, fuel pumps, nozzles, combustion chambers, candles);
• restores the rubbing surfaces of cams;
• increases throttle response;
• efficiency after 5 - 10 km of run.
The sequence of application of the tribological composition "FUEL SYSTEM":
1. Processing is performed at an engine operating temperature of at least +50 degrees.
2. Pour the contents of the bottle (25 ml) into the neck of the fuel tank at the rate of 1 bottle per 50 liters of fuel (gasoline, diesel fuel).
3. Immediately after the tribotechnical bay, the vehicle should begin to move (at least 25-30 minutes).
Note: after 2000 - 2500 kilometers, the procedure must be repeated.
Packaging:
25 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
Posted in For motorcycles
-
-
The ready-to-use tribotechnical composition is intended for processing the fuel system of internal combustion engines (gasoline, diesel) cars, four-stroke engines of motorcycles, jet skis, ATVs, snowmobiles, boats, motor boats and other equipment.
Designed for 2000-2500km mileage.
Recommended price: 1290 rub.
Reference: 7ND1718
Volume: 25 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
Properties:
• anti-friction (reduction of friction losses)
• anti-wear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
Compatible with all motor oils, does not enter into chemical reactions with oils and additives, does not change the viscosity of oils.
The tribotechnical composition of NEODRIVE is not an oil additive.
Efficiency:
• Reduces friction and wear on rubbing surfaces
• Increases engine service life …………………… 2-3 times
• Increases the overhaul life ... 1,5-3 times
• Increases engine power ……………………… 15-18%
• Reduces fuel consumption ………………………………… 15-18%
• Increases and evens out compression in engine cylinders to rated values
• Restores the parameters of worn-out units and mechanisms without disassembling them
• Reduces exhaust gas toxicity by 70-80%
• Increases oil service life by 2-3 times
• Facilitates engine starting at low temperatures
• Eliminates wear during cold start
• Cleans the engine lubrication system of soot and tar deposits
• The cost of processing components and mechanisms is 2-3 times lower than the cost of repairs using conventional technologies
The sequence of application of the tribotechnical composition "ENGINE":
1. Warm up the engine to a working temperature of at least +50 g.
2. Stop the engine.
3. Pour the contents of the vial (50 ml) into the oil filler neck of the engine.
4. Let the engine idle for 5-10 minutes.
5. Make 5-7 relapses.
6. Stop the engine for 10 minutes.
7. Start the engine again and ensure a mileage of at least 50 km.
Note:
• If the oil is very dirty, treat the engine after changing the oil and oil filter.
• The engine can be treated both in old oil (if there is at least 1000 km of run before the next scheduled oil change), and during a scheduled oil change.
• Processing of the motor-vehicle engine with the ENGINE composition is carried out after each regular oil change.
Packaging:
50 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
Posted in For industrial equipment
-
-
The ready-to-use tribological composition is designed to process drilling equipment in order to restore performance and extend the resource.
Designed for 50 liters of oil in the lubrication system.
Article: 7ND1748
Volume: 100 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
Properties:
• anti-friction (reduction of friction losses)
• anti-wear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
The tribotechnical composition "COMPOSITE" forms a protective servo-like film on the friction surface.
The film has high wear resistance and a low coefficient of friction. It compensates for the wear of the material on the surfaces of the parts, reduces their roughness and, at the same time, keeps the lubricant on the friction surface, thereby providing more comfortable working conditions for the parts of the friction unit, which leads to an increase in the service life. It is important that the resulting nanomodified film is stable, and its positive effect on the state of rubbing parts during operation only grows over time and persists when changing the oil.
The tribotechnical composition does not affect the characteristics and condition of parts made of composite materials, ceramics, and rubber products.
Compatible with all oils used in industrial equipment, does not enter into chemical reactions with oil, does not change the viscosity of the oil.
The tribotechnical composition of NEODRIVE is not an oil additive.
Efficiency:
• Reduces friction and wear on friction surfaces.
• Restores the parameters of worn units and mechanisms without disassembling them.
• Recovers gears, bearings and other components of the transmission.
• Increases the overhaul life by 1.5-3 times.
• Reduces fuel consumption, electricity.
• Protects against overheating.
• Repeatedly extends the resource.
• Holds oil to the surface of parts.
• Restores hydraulic pressure to nominal values.
• Optimizes gaps in friction pairs.
• Increases system pressure.
• Restores tightness of stuffing box seal actuators.
• Increases oil life by 1.5-3 times.
The sequence of application of the nanomodifier of friction "COMPOSITE No. 8":
1. Warm up the equipment to a working temperature of at least +50 g.
2. Pour the required amount of tribological composition into the oil through the filling device at the rate of 10 ml of the composition per 5 liters of oil.
3. After making the composition, it is necessary to immediately begin the operation of the equipment and operate in normal mode for at least 30 minutes.
Note:
1. Processing of equipment can be carried out both in old oil (if before the next scheduled oil change at least 20 moto / hours), and during a scheduled oil change.
2. Processing composition "COMPOSITE No. 8" is designed for 1000 motor / hours.
Packaging:
100 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
Posted in For industrial equipment
-
-
Ready-to-use tribotechnical composition is designed for processing gearboxes, multipliers, gears of any type in order to restore performance and extend the life.
Designed for 50 liters of oil in the lubrication system.
Article: 7ND1746
Volume: 100 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
Properties:
• anti-friction (reduction of friction losses)
• anti-wear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
The tribotechnical composition "COMPOSITE" forms a protective servo-like film on the friction surface.
The film has high wear resistance and a low coefficient of friction. It compensates for the wear of the material on the surfaces of the parts, reduces their roughness and, at the same time, keeps the lubricant on the friction surface, thereby providing more comfortable working conditions for the parts of the friction unit, which leads to an increase in the service life. It is important that the resulting nanomodified film is stable, and its positive effect on the state of rubbing parts during operation only grows over time and persists when changing the oil.
The tribotechnical composition does not affect the characteristics and condition of parts made of composite materials, ceramics, and rubber products.
Compatible with all oils used in industrial equipment, does not enter into chemical reactions with oil, does not change the viscosity of the oil.
The tribotechnical composition of NEODRIVE is not an oil additive.
Efficiency:
• Reduces friction and wear on friction surfaces.
• Restores the parameters of worn units and mechanisms without disassembling them.
• Recovers gears, bearings and other components of the transmission.
• Increases the overhaul life by 1.5-3 times.
• Reduces fuel consumption, electricity.
• Protects against overheating.
• Repeatedly extends the resource.
• Holds oil to the surface of parts.
• Restores hydraulic pressure to nominal values.
• Optimizes gaps in friction pairs.
• Increases system pressure.
• Restores tightness of stuffing box seal actuators.
• Increases oil life by 1.5-3 times.
The sequence of application of the nanomodifier of friction "COMPOSITE No. 6":
1. Warm up the equipment to a working temperature of at least +50 g.
2. Pour the required amount of tribological composition into the oil through the filling device at the rate of 10 ml of the composition per 5 liters of oil.
3. After making the composition, it is necessary to immediately begin the operation of the equipment and operate in normal mode for at least 30 minutes.
Note:
1. Processing of equipment can be carried out both in old oil (if before the next scheduled oil change at least 20 moto / hours), and during a scheduled oil change.
2. Processing composition "COMPOSITE No. 6" is designed for 1000 motor / hours.
Packaging:
100 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
Posted in For industrial equipment
-
-
The ready-to-use tribotechnical composition is designed for processing hydraulic systems, presses, actuators, hoists, manipulators, etc. with the aim of restoring performance and extending the resource.
Designed for 300 liters of hydraulic oil in the lubrication system.
Code: 7ND1747
Volume: 100 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
Properties:
• anti-friction (reduction of friction losses)
• anti-wear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
The tribotechnical composition "COMPOSITE" forms a protective servo-like film on the friction surface.
The film has high wear resistance and a low coefficient of friction. It compensates for the wear of the material on the surfaces of the parts, reduces their roughness and, at the same time, keeps the lubricant on the friction surface, thereby providing more comfortable working conditions for the parts of the friction unit, which leads to an increase in the service life. It is important that the resulting nanomodified film is stable, and its positive effect on the state of rubbing parts during operation only grows over time and persists when changing the oil.
The tribotechnical composition does not affect the characteristics and condition of parts made of composite materials, ceramics, and rubber products.
Compatible with all oils used in industrial equipment, does not enter into chemical reactions with oil, does not change the viscosity of the oil.
The tribotechnical composition of NEODRIVE is not an oil additive.
Efficiency:
• Reduces friction and wear on friction surfaces.
• Restores the parameters of worn units and mechanisms without disassembling them.
• Recovers gears, bearings and other components of the transmission.
• Increases the overhaul life by 1.5-3 times.
• Reduces fuel consumption, electricity.
• Protects against overheating.
• Repeatedly extends the resource.
• Holds oil to the surface of parts.
• Restores hydraulic pressure to nominal values.
• Optimizes gaps in friction pairs.
• Increases system pressure.
• Restores tightness of stuffing box seal actuators.
• Increases oil life by 1.5-3 times.
The sequence of application of the nanomodifier of friction "COMPOSITE No. 7":
1. Warm up the equipment to a working temperature of at least +50 g.
2. Pour the required amount of tribological composition into the oil through the filling device at the rate of 10 ml of the composition per 5 liters of oil.
3. After making the composition, it is necessary to immediately begin the operation of the equipment and operate in normal mode for at least 30 minutes.
Note:
1. Processing of equipment can be carried out both in old oil (if before the next scheduled oil change at least 20 moto / hours), and during a scheduled oil change.
2. Processing composition "COMPOSITE No. 7" is designed for 1000 motor / hours.
Packaging:
100 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
