For cars "ENGINE" REGULAR
-
-
The ready-to-use tribotechnical composition is designed to process all types of internal combustion engines (gasoline, gas, diesel) cars with mileage of up to 30,000 km.
Designed for 5l of oil in the engine lubrication system.
Recommended price: 1490 rub.
Item: 7ND1711
Volume: 50 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
Properties:
• anti-friction (reduction of friction losses)
• antiwear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
Compatible with all motor oils used in the car, does not enter into chemical reactions with oils and additives, does not change the viscosity of the oils.
The tribotechnical composition of NEODRIVE is not an oil additive.
Efficiency:
• Reduces friction and wear on rubbing surfaces
• Increases engine service life ……………………… 2-3 times
• Increases the overhaul life ... 1,5-3 times
• Increases engine power ……………………… ... 15-18%
• Reduces fuel consumption …………………………………… 15-18%
• Increases and evens out compression in engine cylinders to rated values
• Restores the parameters of worn-out units and mechanisms without disassembling them
• Reduces exhaust gas toxicity by 70-80%
• Increases oil service life by 2-3 times
• Facilitates engine starting at low temperatures
• Eliminates wear during cold starting
• Cleans the engine lubrication system of soot and tar deposits
The sequence of application of the tribotechnical composition "ENGINE":
1. Warm up the car engine to a working temperature of at least +50 g
2. Stop the engine.
3. Pour the nanomodifier contained in the vial (50 ml) into the engine oil filler neck.
4. Let the engine idle for 5-10 minutes.
5. Make 5-7 relapses.
6. Ensure mileage of at least 50 km.
Note:
1. Engine processing can be carried out both in old oil (if before the next scheduled oil change at least 1000 km of run), and during a scheduled oil change.
2. If the oil is very dirty, treat the engine after changing the oil and oil filter.
3. Processing is designed for 30 thousand km of vehicle mileage.
4. It is advisable to combine engine processing with the transmission and fuel system.
Packaging:
50 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
Properties:
• anti-friction (reduction of friction losses)
• antiwear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
Compatible with all motor oils used in the car, does not enter into chemical reactions with oils and additives, does not change the viscosity of the oils.
The tribotechnical composition of NEODRIVE is not an oil additive.
Efficiency:
• Reduces friction and wear on rubbing surfaces
• Increases engine service life ……………………… 2-3 times
• Increases the overhaul life ... 1,5-3 times
• Increases engine power ……………………… ... 15-18%
• Reduces fuel consumption …………………………………… 15-18%
• Increases and evens out compression in engine cylinders to rated values
• Restores the parameters of worn-out units and mechanisms without disassembling them
• Reduces exhaust gas toxicity by 70-80%
• Increases oil service life by 2-3 times
• Facilitates engine starting at low temperatures
• Eliminates wear during cold starting
• Cleans the engine lubrication system of soot and tar deposits
The sequence of application of the tribotechnical composition "ENGINE":
1. Warm up the car engine to a working temperature of at least +50 g
2. Stop the engine.
3. Pour the nanomodifier contained in the vial (50 ml) into the engine oil filler neck.
4. Let the engine idle for 5-10 minutes.
5. Make 5-7 relapses.
6. Ensure mileage of at least 50 km.
Note:
1. Engine processing can be carried out both in old oil (if before the next scheduled oil change at least 1000 km of run), and during a scheduled oil change.
2. If the oil is very dirty, treat the engine after changing the oil and oil filter.
3. Processing is designed for 30 thousand km of vehicle mileage.
4. It is advisable to combine engine processing with the transmission and fuel system.
Packaging:
50 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
