For cars "TRANSMISSION AUTOMATIC"
-
-
The ready-to-use tribotechnical composition is designed to process automatic gearboxes (including variable-speed automatic transmissions) of cars.
Designed for 5 liters of oil in the lubrication system.
Recommended price: 1290 rub.
Reference: 7ND1715
Volume: 50 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
1 bottle of the automatic transmission (50 ml) is designed to handle any automatic gearbox with a transmission oil volume of up to 8 liters. An overdose when making the composition 1.5-2 times is not dangerous for the gearbox and does not interfere with its operation. If the volume of transmission oil is more than 8 liters, fill 2 bottles of the “automatic transmission” composition.
Properties:
• anti-friction (reduction of friction losses)
• antiwear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
The composition of the “automatic transmission” is compatible with all types of oils, does not enter into chemical reactions with oils and additives, does not change the viscosity of the oils.
It does not affect the characteristics and condition of parts made of composite materials, ceramics and rubber products.
It does not interact with clutch clutches, does not affect the wear and performance of clutch discs, and does not prevent clutch malfunctions.
The tribotechnical composition of NEODRIVE is not an oil additive.
Efficiency:
• Reduces friction coefficient on friction surfaces
• Facilitates gear shifting
• Reduces noise and vibration
• Increases the overhaul life by 1.5-3 times
• Extends resource many times
• Protects against overheating
• Increases car travel in neutral gear
• In CVT restores tension chains
The sequence of application of the tribotechnical composition "Automatic":
1. Warm up the gearbox to an operating temperature of +50 g.
2. Stop the engine.
3. Pour the contents of the vial (50 ml) into the oil filler opening of the unit.
4. Immediately after adding the composition, the vehicle should begin to move (at least 25-30 minutes) in normal operation.
5. It is not recommended to carry out processing in case of mechanical breakdown of parts and components of the transmission.
6. For long trouble-free operation of the automatic gearbox, it is recommended to use the “automatic transmission” composition after each scheduled replacement of gear oil.
Note:
• If oil is very dirty, treat automatic transmission after changing the oil and oil filter.
• It is recommended to process the automatic gearbox with the processing of axle gearboxes, the transfer case of the car.
Packaging:
50 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
1 bottle of the automatic transmission (50 ml) is designed to handle any automatic gearbox with a transmission oil volume of up to 8 liters. An overdose when making the composition 1.5-2 times is not dangerous for the gearbox and does not interfere with its operation. If the volume of transmission oil is more than 8 liters, fill 2 bottles of the “automatic transmission” composition.
Properties:
• anti-friction (reduction of friction losses)
• antiwear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
The composition of the “automatic transmission” is compatible with all types of oils, does not enter into chemical reactions with oils and additives, does not change the viscosity of the oils.
It does not affect the characteristics and condition of parts made of composite materials, ceramics and rubber products.
It does not interact with clutch clutches, does not affect the wear and performance of clutch discs, and does not prevent clutch malfunctions.
The tribotechnical composition of NEODRIVE is not an oil additive.
Efficiency:
• Reduces friction coefficient on friction surfaces
• Facilitates gear shifting
• Reduces noise and vibration
• Increases the overhaul life by 1.5-3 times
• Extends resource many times
• Protects against overheating
• Increases car travel in neutral gear
• In CVT restores tension chains
The sequence of application of the tribotechnical composition "Automatic":
1. Warm up the gearbox to an operating temperature of +50 g.
2. Stop the engine.
3. Pour the contents of the vial (50 ml) into the oil filler opening of the unit.
4. Immediately after adding the composition, the vehicle should begin to move (at least 25-30 minutes) in normal operation.
5. It is not recommended to carry out processing in case of mechanical breakdown of parts and components of the transmission.
6. For long trouble-free operation of the automatic gearbox, it is recommended to use the “automatic transmission” composition after each scheduled replacement of gear oil.
Note:
• If oil is very dirty, treat automatic transmission after changing the oil and oil filter.
• It is recommended to process the automatic gearbox with the processing of axle gearboxes, the transfer case of the car.
Packaging:
50 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
