For passenger cars "GUR"
Ready-to-use tribotechnical composition is designed for processing power steering (GUR) of cars in order to restore performance and extend the life.
Designed for 3 liters of hydraulic oil in the lubrication system.
Recommended price: 950 rub.
Volume: 25 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
• anti-friction (reduction of friction losses)
• antiwear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
The tribotechnical composition does not affect the characteristics and condition of parts made of composite materials, ceramics, and rubber products.
It is compatible with all hydraulic oils used in the hydraulic booster of a car, does not enter into chemical reactions with the oil, does not change the viscosity of the oil.
The tribotechnical composition of NEODRIVE is not an oil additive.
• Reduces friction and wear on rubbing surfaces
• Restores power steering units
• Increases system pressure
• Facilitates steering wheel rotation
• Improves vehicle dynamics
• Reduces noise and vibration
• Protects power steering from wear
• Increases oil life by 1.5-3 times
• Extends resource many times
The sequence of application of the tribotechnical composition "GUR":
1. Warm up the engine. Processing is carried out at an engine operating temperature of at least +50 degrees.
2. Pour the contents of the vial (25 ml) into the fluid in the power steering reservoir that is heated to operating temperature.
3. After applying the friction nanomodifier with the engine turned on, after 2-3 minutes it is necessary to rotate the steering wheel (left and right until it stops) for 5 minutes.
It is recommended to use the "GUR" composition after each change of hydraulic oil.
25 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.