-
-
Ready-to-use tribotechnical composition is designed for processing power steering (GUR) of cars in order to restore performance and extend the life.
Designed for 3 liters of hydraulic oil in the lubrication system.
Recommended price: 950 rub.
Reference: 7ND1714
Volume: 25 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
Properties:
• anti-friction (reduction of friction losses)
• antiwear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
The tribotechnical composition does not affect the characteristics and condition of parts made of composite materials, ceramics, and rubber products.
It is compatible with all hydraulic oils used in the hydraulic booster of a car, does not enter into chemical reactions with the oil, does not change the viscosity of the oil.
The tribotechnical composition of NEODRIVE is not an oil additive.
Efficiency:
• Reduces friction and wear on rubbing surfaces
• Restores power steering units
• Increases system pressure
• Facilitates steering wheel rotation
• Improves vehicle dynamics
• Reduces noise and vibration
• Protects power steering from wear
• Increases oil life by 1.5-3 times
• Extends resource many times
The sequence of application of the tribotechnical composition "GUR":
1. Warm up the engine. Processing is carried out at an engine operating temperature of at least +50 degrees.
2. Pour the contents of the vial (25 ml) into the fluid in the power steering reservoir that is heated to operating temperature.
3. After applying the friction nanomodifier with the engine turned on, after 2-3 minutes it is necessary to rotate the steering wheel (left and right until it stops) for 5 minutes.
It is recommended to use the "GUR" composition after each change of hydraulic oil.
Packaging:
25 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
-
-
The ready-to-use tribotechnical composition is designed to process automatic gearboxes (including variable-speed automatic transmissions) of cars.
Designed for 5 liters of oil in the lubrication system.
Recommended price: 1290 rub.
Reference: 7ND1715
Volume: 50 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
1 bottle of the automatic transmission (50 ml) is designed to handle any automatic gearbox with a transmission oil volume of up to 8 liters. An overdose when making the composition 1.5-2 times is not dangerous for the gearbox and does not interfere with its operation. If the volume of transmission oil is more than 8 liters, fill 2 bottles of the “automatic transmission” composition.
Properties:
• anti-friction (reduction of friction losses)
• antiwear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
The composition of the “automatic transmission” is compatible with all types of oils, does not enter into chemical reactions with oils and additives, does not change the viscosity of the oils.
It does not affect the characteristics and condition of parts made of composite materials, ceramics and rubber products.
It does not interact with clutch clutches, does not affect the wear and performance of clutch discs, and does not prevent clutch malfunctions.
The tribotechnical composition of NEODRIVE is not an oil additive.
Efficiency:
• Reduces friction coefficient on friction surfaces
• Facilitates gear shifting
• Reduces noise and vibration
• Increases the overhaul life by 1.5-3 times
• Extends resource many times
• Protects against overheating
• Increases car travel in neutral gear
• In CVT restores tension chains
The sequence of application of the tribotechnical composition "Automatic":
1. Warm up the gearbox to an operating temperature of +50 g.
2. Stop the engine.
3. Pour the contents of the vial (50 ml) into the oil filler opening of the unit.
4. Immediately after adding the composition, the vehicle should begin to move (at least 25-30 minutes) in normal operation.
5. It is not recommended to carry out processing in case of mechanical breakdown of parts and components of the transmission.
6. For long trouble-free operation of the automatic gearbox, it is recommended to use the “automatic transmission” composition after each scheduled replacement of gear oil.
Note:
• If oil is very dirty, treat automatic transmission after changing the oil and oil filter.
• It is recommended to process the automatic gearbox with the processing of axle gearboxes, the transfer case of the car.
Packaging:
50 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
-
-
The ready-to-use tribotechnical composition is designed for processing mechanical gearboxes, axle gearboxes, transfer cases for cars.
Designed for 5 liters of oil in the lubrication system.
Recommended price: 950 rub.
Reference: 7ND1717
Volume: 50 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
1 bottle of the REDUKTOR composition (50 ml) is designed to handle any axle gearboxes, transfer cases, differentials, transmission clutches with a transmission oil volume of up to 2.5 liters. An overdose when making the composition 1.5-2 times is not dangerous for the gearbox and does not interfere with its operation.
Properties:
• anti-friction (reduction of friction losses)
• antiwear (reduced wear rate)
• anti-seize (increase in ultimate load of setting friction surfaces)
The “REDUCER” composition is compatible with all types of oils, does not enter into chemical reactions with oils and additives, does not change the viscosity of oils.
It does not affect the characteristics and condition of parts made of composite materials, ceramics and rubber products.
It does not interact with clutch clutches and does not affect their wear and performance.
The tribotechnical composition of NEODRIVE is not an oil additive.
Efficiency:
• Reduces friction coefficient on friction surfaces
• Restores and protects transfer boxes, axle gearboxes, differentials, couplings from wear
• Reduces noise and vibration
• Increases the overhaul life by 1.5-3 times
• Extends resource many times
• Protects against overheating
• Increases car travel in neutral gear
The sequence of application of the tribological composition "REDUCER":
1. Warm up the gearbox to an operating temperature of +50 g.
2. Stop the engine.
3. Pour the contents of the vial (50 ml) into the oil filler opening of the unit.
4. Immediately after adding the composition, the vehicle should begin to move (at least 25-30 minutes) in normal operation.
5. It is not recommended to carry out processing in case of mechanical breakdown of parts and components of the transmission.
6. For long trouble-free operation of transmission units, it is recommended to use the “REDUCTOR” compound after each scheduled replacement of transmission oil.
Note:
1. If the oil is very dirty, treat the engine after changing the oil and oil filter.
2. It is recommended to process the transmission units with the processing of the gearbox of a passenger car.
Packaging:
50 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees /
Shelf life: 5 years. The date of manufacture is indicated on the label.
-
-
The ready-to-use tribotechnical composition is intended for processing the fuel system of internal combustion engines (gasoline, diesel) cars, four-cycle engines of motorcycles, jet skis, ATVs, snowmobiles, boats, motor boats and other equipment.
Designed for 2000-2500 kilometers.
Recommended price: 1290 rub.
Item: 7ND1718
Volume: 25 ml.
Composition: nanostructure antiwear anti-friction repair and recovery composition NEODRIVE.
Properties:
• The tribotechnical composition of NEODRIVE is not a fuel additive, compatible with all types of fuel used in the car.
• The tribotechnical composition forms a servo layer on the details of the fuel supply system (including the supply system to the nozzles, especially piezoelectric nozzles), thereby protecting it from premature wear, and in some cases, restores worn areas of rubbing parts.
• The composition changes the molecular structure of the fuel so that the combustion process proceeds more fully, with an increase in heat transfer. Covers the surface of the combustion chamber with a layer of molecules that create the effect of repulsion of particles of burning fuel having the same charge. As a result, there is no soot on candles, nozzles, in the combustion chamber, rings, lower specific fuel consumption, lower coolant temperature, lack of self-ignition, reduction of detonation in gasoline engines, and mild operation of diesel engines.
Efficiency:
• reduces fuel consumption;
• reduces harmful exhaust emissions;
• restores and keeps clean injectors;
• improves engine performance;
• increases engine life;
• removes deposits on valves and in the combustion chamber;
• cleans the fuel system (jets, fuel pumps, nozzles, combustion chambers, candles);
• restores the rubbing surfaces of cams;
• increases throttle response;
• efficiency after 5 - 10 km of run.
The sequence of application of the tribological composition "FUEL SYSTEM":
1. Processing is carried out at an engine operating temperature of at least +50 degrees.
2. Pour the contents of the bottle (25 ml) into the neck of the fuel tank at the rate of 1 bottle per 50 liters of fuel (gasoline, diesel fuel).
3. Immediately after the tribotechnical bay, the vehicle should begin to move (at least 25-30 minutes).
Note: after 2000 - 2500 kilometers, the procedure must be repeated.
Packaging:
25 ml bottle with cap and label.
Cardboard box with instructions for use.
Storage conditions: from - 20 to + 50 degrees.
Shelf life: 5 years. The date of manufacture is indicated on the label.
